All you need for this bit is a soft brass brush , metal polish, and elbow grease and or a polishing wheel.
**********************************
Give it all a going over with the brush to get the white powdery
stuff off
like this...
*******************************************
If you have a wheel give it a light once over.
then stub your fingers and use metal polish.
Don't forget the important little places.. use a cotton bud..
Clean up the flange ...(he said ..flange....he he he snigger..snigger)..
..lightly on an emery block
then your manky old carb should look like this..
( if not do it again..)
( if not do it again..)
No comments:
Post a Comment